Abstract:
A new speciation model developed and implemented in Polymath was found to be successful in predicting struvite precipitation in soils. Struvite (NH4MgPO4) has been identified as a mineral for the recovery of nitrogen (N) and phosphorus (P). Predicting struvite precipitation potential in soil is important for optimal quantification of nutrient species. Polymath and Visual Minteq models were used for prediction of several solid phases in the soil. One approach to immobilize P for solid-phase formation is by co-blending. Immobilization was achieved through the blending of an Al-based water treatment residual (Al-WTR) and with Ca–Mg-based materials [slag and magnesium oxide (MgO)]. The
results suggest that Polymath model revealed solid Phases of dicalcium phosphate pentahydrate (DCPP), magnesium hydroxide (MHO), magnesium orthophosphate (v) docosahydrate (MP22), magnesium orthophosphate (v) octahydrate (MP8), and struvite, which were lacking in the modeling from Visual Minteq. Residual leachate from the co-blended amendments; Soil+WTR+Slag, Soil+WTR+MgO, Soil+MgO, Soil+Slag, Soil+WTR, and the control (without amendment) had struvite of 353, 199, 119, 90, 37, and 12 mg l-1, respectively. This implies that struvite, a phosphate mineral can be precipitated in the soil and could be released as nutrients for plant uptake. Struvite precipitation in soil and for reuse may reduce cost and may be a safe practice for sustainable environmental nutrient management
